How deep should a pallet flow lane be?

Five to twenty pallets is typical. Depth should match how much of one SKU moves through in a cycle - a lane that never fills is wasting a pick face. We size depth from your actual movement data, not a rule of thumb.

What keeps pallets from moving too fast down the lane?

Lane pitch is calculated for the load, and brake rollers or separators control travel from there. Pallets index forward at a walking pace, protecting both product and frames.

Does pallet condition matter?

A great deal. Broken bottom boards and heavy overhang cause most hang-ups in flow lanes. If your pallet pool is rough, full-width rollers are the safer specification, and we'll tell you that up front rather than after installation.

Can flow racking work in a freezer?

Yes - cold storage is one of the strongest arguments for it, since density directly reduces refrigerated cubic feet you're paying to cool. Components get specified for the temperature range so bearings and brakes behave in the cold.

Can a Hanford pallet flow rack project be phased around food processing operations near Lacey Boulevard?

Hanford's Kings County industrial base includes food processing and manufacturing with different inventory demands. Route 198 supports regional movement, but a Lacey Boulevard or industrial-park facility still needs its own checks for ceiling obstructions, doors, and working aisles. Agree the work zones, inventory transfers, access windows, and handover sequence before starting. Phasing is evaluated against your current storage needs and site conditions; uninterrupted operation and a particular completion date cannot be assumed until the scope and approvals are known.

Pallet Flow Rack warehouse storage system

Hanford, California

Pallet Flow Rack in Hanford, CA

A Hanford food facility managing production lots needs a controlled path for older inventory. Pallet flow can separate incoming pallets from dispatch picks, with actual pallet testing before the system is released. Hanford's Kings County industrial base includes food processing and manufacturing with different inventory demands. Route 198 supports regional movement, but a Lacey Boulevard or industrial-park facility still needs its own checks for ceiling obstructions, doors, and working aisles. Pallet Flow Rack in Hanford, CA starts with pallet-level first in, first out with separate loading and picking faces. We review pallet bottom-board condition, weight range, roller specification, brakes, and lane depth before recommending a configuration.

You get a free design consultation, a CAD plan, and an itemized quote for your actual building, not an assumed warehouse footprint. Two access faces and loaded travel testing are essential; unsuitable pallets can stall even a correctly specified flow lane. Call (559) 620-5206 to discuss the constraint that is holding up your next receipt or order.

(559) 620-5206

Why Hanford Warehouses Work With Us

Hanford's Kings County industrial base includes food processing and manufacturing with different inventory demands. Route 198 supports regional movement, but a Lacey Boulevard or industrial-park facility still needs its own checks for ceiling obstructions, doors, and working aisles. Do not assume a new rack elevation fits an existing Hanford roof or lighting arrangement. Separate manufacturing supplies from dispatch inventory and verify usable height and the handling route before deciding how much reserve density to add.

For pallet flow rack, that means checking pallet bottom-board condition, weight range, roller specification, brakes, and lane depth against the way your Hanford team actually works. Two access faces and loaded travel testing are essential; unsuitable pallets can stall even a correctly specified flow lane. We compare the storage arrangement with the receiving, production, and dispatch space it leaves available, so a higher count does not come at the expense of daily access.

Fresno Pallet Racks connects your project with Warehouse Equipment & Supplies Co.. You can discuss the Hanford plan with one contact, ask for a revised layout, and see the scope in writing before ordering. A free design consultation should explain both the benefit and the tradeoff of pallet flow rack; it should not pressure you into a system that mismatches your inventory. Installation timing and any later additions are planned around the actual site and approved configuration.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Pallet flow rack lanes with gravity rollers installed

Flow racking system loaded with pallets at the pick face

Operations We Rack Around Here

Local industrial and transport corridors include State Route 198, Lacey Boulevard, Hanford Industrial Park.

Food processing

Manufacturing

Parts distribution

How Pallet Flow Rack Works

Load one side, pick the other, and let gravity enforce first in, first out.

Load end

Pallets enter at the high end of the lane. Each new pallet stages behind the one before it, so put-away is a single move made from the load-side aisle.

Gravity conveyor

Full-width rollers or skate-wheel tracks, set on a pitch calculated for the pallet weight, carry loads forward under control rather than free rolling.

Braking and separation

Brake rollers and pallet separators regulate travel and stop pallets from bunching, protecting both the product and the structure underneath it.

Pick end

Pickers work a face of first-in pallets. Pull one and the next indexes forward automatically, so the pick aisle stays organized without anyone re-facing stock.

What a Pallet Flow Rack Project Includes

Your Hanford pallet flow rack project starts with a practical inventory and building review. We collect pallet bottom-board condition, weight range, roller specification, brakes, and lane depth, usable ceiling height, column locations, door positions, and the current traffic pattern. Do not assume a new rack elevation fits an existing Hanford roof or lighting arrangement. Separate manufacturing supplies from dispatch inventory and verify usable height and the handling route before deciding how much reserve density to add. Photos and an existing drawing help start the conversation; dimensions and conditions must be confirmed before an installation plan is finalized.

The CAD layout shows the storage arrangement, operating aisles, level or lane elevations, and the usable position count. We review pallet-level first in, first out with separate loading and picking faces against an alternative where a comparison helps. The itemized quote identifies the system components, specified capacities, protection, and installation scope. Our team handles the permit side for you.

Delivery and work zones are planned around the access at your State Route 198 or Lacey Boulevard building. Installation follows the approved configuration, with frames or bases anchored as specified, connections checked, and alignment verified. Systems with moving carts, rollers, or wheel beds are checked with representative loads. Two access faces and loaded travel testing are essential; unsuitable pallets can stall even a correctly specified flow lane. Your team receives the agreed configuration and capacity information, a layout to use for later changes, and a clear contact for follow-up questions. Do not change elevations or loads without checking whether the ratings and approvals still apply.

Date-coded food, beverage, and pharmaceutical inventory

High-volume SKUs with steady, predictable turns

Cold storage where every cubic foot carries a cost

Staging finished goods coming off a production line

Operations that need FIFO documented, not just assumed

Call (559) 620-5206

Recent Installations

Racking projects completed for warehouses across Fresno and the Central Valley.

View More Projects

Get a Pallet Flow Rack Quote for Your Hanford Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (559) 620-5206.

Fresno Pallet Racks

5730 N First St

Ste 105 #252

Fresno, CA 93710

(559) 620-5206

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Fresno Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.